How long does mudding drywall take

This isn't housing tract mentality; this isn't about fly by night. This is modern home building. Rather than insulting me; please get current with trends. And no; I really, truly do not mean any offense by that; but there are a LOT of very modern inventions, processes, and products that allow this without sacraficing quality. And that's why I responded as I did to the OP. It CAN take from anywhere from a day to What exactly is your job, Sierra? Because I assume you're a contractor to speak so elegantly and informatively about the process.

So you know that USG now sells more drymix compounds than redi-mix for finishing drywall, and I assume you are well aware and familiar with fast setting compounds:. As I'm sure you know; setting type compounds as shown above are far superior to redi-mix type compounds for both binding and preventing cracks in the first coat the tapecoat. For top compounds, a two, three or even four coat process is generally done with They're used in the same manner as redi-mix topping coats, but of course dry faster.

One of the unfortunate side items of our economy is that USG has discontinued many of their forumulas. Now, you can get 20, 30, 45, 90, and That's minutes of total set; dried; ready to sand. They used to have 10 and 5 minute sets, too. What that means is that with the dry compounds, properly mixed and applied, they are done, dried, ready to sand at those set times. Apply a minute Easy Sand, and after your coffee break, you're ready to sand or put the next coat on. And let's not forget the tools I mentioned.

Taping tools such as bazookas which replaced Banjos about 20 years ago , and flatboxes allow near perfect tape and tapecoat application. Flatboxes in particular allow perfect 4, 6, 8, 10, and 12" feathering that don't require sanding in the right hands, of course. Couple that with a 45 or 90 minute compound, and you're done in a day or two.

Certainly if you are dragging 5-gallon buckets of redi-mix around, it's gonna take more time and rely more on hand skills, but rather than insulting others, why don't you look into the process that is now used in more new homes than the one you're describing? Oh, and by the way; after two decades building spec and custom homes, and working with the oldest housing stock in the nation on literally hundreds of remodels; I've had 6 screw pops.

I hope the finishers don't get insulted, but they're definitely not painting on Monday. I checked the walls this morning and the nails need more mud--there's an indentation over each and every one of them.

The striped areas look pretty smooth. I've had subs on small jobs using Durabond 90 for more than 20 years. However, the drywall companies I use for whole homes have always hired tapers who use standard compounds--usually while walking around on illegal stilts. Another story. And I'm not about to second guess them as long as the finished job is acceptable.

I've seen autotapers and flatboxes since forever. It generally works out to two weeks for taping and finishing a 6, sq.

I never calculate the wall area. I found it wasn't worth the effort to bypass a drywall contractor. Sorry, unless perhaps you're using kiln-dried lumber I find that impossible to believe. Though maybe that's more in the definition. I have less tolerance for minor defects than some, a habit I picked up from dealing with picky buyers; no clue about structure, but a speck on the paint or drywall gets their back up.

Screw-pops are not a warranted item here. Finishing set in action. Here is a link that might be useful: Auto taper in action. For what it's worth, I looked in the trash and noticed the empty packages of compound were red, white, and blue like the ones in the second set of pictures.

Unfortunately, I didn't notice the number. After reading all these comments, maybe the locks on the house should be changed before the guys return on Monday.

Another question: what's a primer surfacer? Will the paint adhere as well? Indem Sie weiterhin auf der Website surfen bzw. Mehr erfahren. Ultimate Lighting Sale. Bathroom Vanity Sale. Bestselling Chandeliers and Pendants. Sign In. Join as a Pro. Houzz TV. Houzz Research. Does the house have HVAC? Is there rain in the forecast?

High humidity will stall dry times for mud. I've had crews that exclusively do drywall work do a house that size in 3 or 4 days, but that's their specialty, and they show up with 8 guys. Expecting 2 guys to do it it 24 hrs is pretty unrealistic. It can take up to 3 coats of mud and will often take 24 hrs for mud to dry before you can sand and hit it again.

Jason Coyle thank you for the information. There will be no texture. Smooth walls and ceilings. Smooth wall will take a bit longer with pretty substantial bedding work.

If you have a couple of really amazing guys doing the work, hopefully they get it knocked out within a week. That would be pretty impressive.

How to Finish Drywall. By Jefferson Kolle. Pinterest Email Pocket Flipboard. Is It Hard to Finish Drywall? Drywall Finishing Steps Overview Gregory Nemec The tricky part is learning how to properly bed the tape and feather out the compound to an imperceptible edge. Stir compound and prep surfaces Allen Penn Cut band on top of the bucket with a utility knife or tin snips and pry off lid.

Mix at slow speed until water is blended and compound is smooth. If there's no water, the compound is ready to use. Look for any screwheads poking above the drywall surface and drive them until slightly recessed. Tear away any loose or torn paper from drywall especially at corners and cut edges to prevent bits from ending up in the compound.

Cover joints and screwheads Allen Penn Using 5-inch knife, fill mud box halfway with compound. Load the edge of the knife blade with about 2 inches of compound. Starting in one corner of the room, force the compound into the joints between sheets. When they're completely filled, hold the knife at a degree angle to the surface and smooth out the compound in a single pass. Since some of these factors are location-dependent, it would help if you consulted drywall experts in your locality to understand how factors such as weather conditions affect the drying time of drywall mud.

Is it possible to apply one drywall mud layer in the morning and apply another at noontime? It is possible to make drywall mud dry faster through the use of some tricks. Most of the below tips help tweak unfavorable factors affecting drying to reduce drying time.

A valuable tip for optimizing the roles of the drywall mud while reducing the drying time is applying a relatively thicker base coat and thinning out the other layers. The hot mud is mixed with water in proportions indicated in the manual before application. A tip when using hot mud is to mix it with water in small amounts to avoid pre-drying before application on drywall.

Yes, it is possible, but it again depends on the thickness of the drywall mud patches. Using a hairdryer can only be energy efficient when drying thinner layers. To do this, aim the dryer a few centimeters away from the curing layer and turn the appliance on. The hairdryer not only raises the temperature of the targeted area but also increases air circulation near the place. If your mud work involved the application of a thin layer, then it would not be a big deal to paint over wet mud.

Thicker mud layers need to dry for at least 12 hours before painting or priming to prevent the shrinking of the compounds as the mud cures. It is also advisable to use a sprayer bottle instead of using brushes and rollers as they could compromise the smoothness of the wet joint compound.